Bulletproof Suspension Kit Includes
- One Piece cage
- Upper Control Arms
- Upper Control Arm Drops
- Differential Drops
- Differential Cross Member
- Impact bars
- Upper Control Arm Cross Member
- Steering Bracket
- Steering Linkage
- Steel Braided Brake Lines
- 4 Link Drop Downs
- Coil Spacers
- Pan-hard Extension
- Pan-hard Support Link
- 4 Link Tie in Plate
- Sway Bar Links
- Complete Hardware Kit
2007-2020 Chevy-GMC 10-12 Inch Lift Kit Tahoe Suburban Yukon Escalade Avalanche
This Chevy-GMC 10-12 Inch Bulletproof Suspension Lift Kit will fit 2007-2020 Chevy, GMC and Cadillac SUV’S. All the Bulletproof Suspension manufactured parts are coated in a glossy black powder coat, so the kit is ready to be installed right out of the box. Other color options are available at a additional cost. Bulletproof Suspension kits require no welding or major cutting. (some minor cutting/trimming may be involved with some vehicles). Bulletproof Suspension designed this kit to keep the factory track width and alignment specs. With this kit you will be able to run up to 37″ x 13.50 Tires, recommended back spacing for wheel is 4 1/2″.
Bulletproof Suspension only uses the best when manufacturing your kit, We use A36 Steel Plate 1/4″ thick or thicker and heavy wall DOM, Seamless steel tubing, and continuous seam welding.
Bulletproof Suspension’s 10″ 12″ SUV Kit for 2007-2020 GM models uses a one piece lift cage that is truss re-enforced, and heavy duty coil spacers, differential drops for 4wd models, Upper Control arm drops, Impact bars, Upper Control arms with ball joints, upgraded tie rod ends (Heim joints) Steering brackets and extensions. The Bulletproof Suspension kit was designed to keep all angels as close to factory specs as possible to prevent any hard angels, binding or bump steering. The Bulletproof Suspension kit will work with Stabilitrack and auto ride models.
*front drive shafts need to be extended 1 1/2 “
*lift time warranty doesn’t cover wearable parts like, ball joints, bushings, Heim joints, Uniballs and shocks.
*Cadillac and Denali Models require after market CV front driveshafts, shafts can be purchased through Bulletproof Suspension.
CV front driveshaft $595.00
Option 1 (Basic)
- Bulletproof Kit $4,450.00
- Standard shocks Rear (Set of 2) $138.00
Total: $4,588.00
Option 2 (Upgraded)
- Bulletproof Kit $4,450.00
- Bulletproof 2.0 Reservoir shocks (Set of 2) $590.00
- Bulletproof Billet Shock Clamps ($32X4) $128.00
Total: $5,168.00
Option 3 (Upgraded+)
- Bulletproof Kit $4,450.00
- Bulletproof 2.0 Reservoir shocks (Set of 2) $590.00
- Bulletproof 2.5 Coil Overs/Springs (Set of 2) $1690.00
- Coilover Reservoir mounting brackets ($40X2) $80.00
- Bulletproof Billet Shock Clamps ($32X4) $128.00
Total: $6,938.00
Option 4 (Complete Upgrades)
- Bulletproof Kit $4,450.00
- Bulletproof 2.0 Reservoir shocks (Set of 2) $590.00
- Bulletproof 2.5 Coil Overs/Springs (Set of 2) $1690.00
- Coilover Reservoir mounting brackets ($40X2) $80.00
- Bulletproof Billet Shock Clamps ($32X4) $128.00
- Uniball A-Arms $250.00
Total: $7,188.00
Tire Size: 37”-38″ & Required wheel backspacing 4 ½”
**Shipping and any Taxes that may apply are not included in above prices.
