Chat with us, powered by LiveChat

Bulletproof Suspension kit includes

  1. One Piece lift cage
  2. Upper Control Arms
  3. Upper Control Arm drops
  4. Upper Control Arm Cross Member
  5. Differential Drops
  6. Sway bar drops
  7. Impact bars
  8. Coil spacers
  9. Brake Lines
  10. Steering extensions
  11. steering mount
  12. Complete Hardware kit.

2014-2018 Chevy-GMC 1500 10″-12″ Lift Kit

This Bulletproof Suspension Chevy-GMC 1500 10-12 Inch Lift Kit will fit 2014-2018 Chevy, 1500 2wd and 4wd models, Extended cab, crew cab, reg cab, both short and long beds. . All the Bulletproof Suspension manufactured parts are coated in a glossy black powder coat, so the kit is ready to be installed right out of the box. Other color options are available at a additional cost. Bulletproof Suspension kits require no welding. (some minor cutting/trimming may be involved with some vehicles).  Bulletproof Suspension designed this kit to keep the factory track width and alignment specs.  With this kit you will be able to run  37″ x 13.50  up to 38 x 13.50 Tires, recommended back spacing for wheel is 4 1/2″.

Bulletproof Suspension only uses the best when manufacturing your kit, We use A36 Steel Plate 1/4″ thick or thicker and heavy wall DOM, Seamless steel tubing, and continuous seam welding.

Bulletproof Suspension’s 10″ 12″  Kit for 2014-2018 Chevy and GMC 1500 models uses a one piece lift cage that is truss re-enforced, and heavy duty coil spacers, differential drops for 4wd models, Upper Control arm drops, Impact bars, Upper Control arms with ball joints, upgraded tie rod ends (Heim joints) Steering brackets and extensions. The Bulletproof Suspension kit was designed to keep all angels as close to factory specs as possible to prevent any hard angels, binding or bump steering.  The Bulletproof Suspension kit will work with Stabilitrack and auto ride models.

*front drive shafts need to be extended 1 1/2 ”

Denali Models require after market CV front driveshafts, shafts can be purchased through Bulletproof Suspension.

*lift time warranty doesn’t cover wearable parts like, ball joints, bushings, Heim joints, Uniballs and shocks.

Option 1 (Basic)

  • Bulletproof Kit  $3,590.00
  • Atlas leaf springs (Set of 2)  $1,060.00
  • Standard shocks Rear (Set of 2)  $118.00

     Total:  $4,768.00


Option 2 (Upgraded)

  • Bulletproof Kit  $3,590.00
  • Atlas leaf springs (Set of 2)  $1,060.00
  • Bulletproof 2.0 Reservoir shocks (Set of 2)  $570.00
  • Bulletproof Billet Shock Clamps ($30X4)  $120.00

     Total:  $5,340.00


Option 3 (Upgraded+)

  • Bulletproof Kit  $3,590.00
  • Atlas leaf springs (Set of 2)  $1,060.00
  • Bulletproof 2.0 Reservoir shocks (Set of 2)  $570.00
  • Bulletproof 2.5 Coil Overs/Springs (Set of 2)  $1630.00
  • Front Coilover Reservoir mounting brackets ($30X2) $60.00
  • Bulletproof Billet Shock Clamps ($30X4)  $120.00

     Total: $7,030.00


Option 4 (Upgrades++)

  • Bulletproof Kit  $3,590.00
  • Atlas leaf springs (Set of 2) $1060.00
  • Bulletproof 2.0 Reservoir shocks (Set of 2)  $570.00
  • Bulletproof 2.5 Coil Overs/Springs (Set of 2)  $1630.00
  • Bulletproof Billet Shock Clamps ($30X4)  $120.00
  • Front Coilover Reservoir mounting brackets ($30X2) $60.00
  • Rear Traction Bars  $760.00
  • Uniball A-Arms (Set of 2)  $250.00

     Total:  $8,040.00

Option 5 (Complete Upgraded)

  • Bulletproof Kit  $3,590.00
  • Front Bulletproof 2.5 Coil Overs/Springs (Set of 2) $1630.00
  • Front Coilover Reservoir mounting brackets ($30X2) $60.00
  • Rear Bulletproof 2.5 Coil Overs/Springs (Set of 2) $1630.00
  • Rear 4 Link Cantilever System $5,160.00
  • Uniball A-Arms (Set of 2)  $250.00

     Total: $12,320.00


Tire Size: 37”- 38″ & Required wheel backspacing 4 ½” **Shipping and any Taxes that may apply are not included in above prices.  

CONTACT US

Send us a message and we will get back to you as soon as possible!

Sending
Copyright © 2017 Bulletproof Suspension Inc.
Call Now Button

Log in with your credentials

Forgot your details?